Advantages of remote-control: Allows you to place unit farther away (On/Off switch and speed control are on a 4' cable)

• On floor while in bed
• On floor when standing
• On floor while seated in a chair or on a bathroom stool
• On a shelf or stand out of arm's reach
• When detached, there is nothing on the unit to indicate what it is or what it does
• V2000 purchased without remote control can NOT be upgraded

Advantages of non-remote: (On/Off switch and speed control are on the unit.)

• Costs less.
• No extra cable to store
• No need to plug in and unplug each time you put it away

COMPACT: 6" high, 8" wide and 9- 1/2 " long and weighs only 11 pounds.

HANDLE: Convenient and balanced.

QUALITY GEARMOTOR: The unit is powered by a very high quality 1/16 HP - 15:1 ratio Gearmotor made by Bodine Electric Co.

HEART OF THE SYSTEM: Air is moved by a specially designed and molded, one-of-a-kind diaphragm. It has the ability to push and pull air at a high speed and remain nearly silent.

QUIET: It makes very little sound. On slower speeds, Venus is nearly inaudible.

PERSONALIZED STROKE-LENGTH ADJUSTMENT: The V2000 has 5 internal settings that control the amount of airflow. The factory setting accommodates the majority. Once properly set, most users do not need to make any further adjustment.

FINE AIR ADJUSTMENT: The degree of arousal (erection) sometimes requires a fine adjustment to control the stroke length. Each V2000 package includes an air control box to easily make this adjustment.

ADDITIONAL CONTROL: Each unit has a lighted ON/OFF switch. You can turn the unit OFF when you wish to stop the action immediately. You will return to the same stroke speed when it is turned back ON.

SAFE: The electrical components are protected by a fuse. A spare fuse is included.

UNOSTENTATIOUS: Everything is black: case, handle, feet, power cord, remote control cord, remote control box, even the tubing.

AMBIGUOUS: The V2000 has no markings or identification. It has an attractive nondescript black textured housing. The power cord, remote control and both hoses disconnect from the unit. When traveling you can identify it any way you wish. EXAMPLE: "Its my rock polishing machine."

PRECISE SPEED CONTROL: A knob controls stroke speed from beginning to end of rotation.

WIDE SPEED RANGE: Operates from 8 to 300 strokes per minute.

EASY SETUP: It takes less than 2 minutes to get the unit out and have it ready to go.

EASY TO PUT AWAY: With the purchase of the Zippered Bag, all parts can be put away in moments.

FEATURES OF THE CUSTOM FIT ATTACHMENTS

We have four configurations of attachments:

RECEIVER : This is the primary attachment. An 'enclosed' stroking device with a removable "End Cap" for easy cleaning. Custom fit, based on measurements you must provide. Designed for "hands-free" masturbation with the Venus 2000 system, with or without an erection. To use a Receiver manually requires an erection.

PUMP: A recreational vacuum device for use with the Venus 2000 system. By pulling blood in, this attachment can create a fully engorged penis from a flaccid state or enhance an existing erection. With regular use, it can benefit penial health. (Use it or lose it)

*HEAD MASSAGER: (HM) An erotic foreplay device. The V2000 causes it to do a squeeze-release action wherever placed. Used by many before switching to a Receiver. Manual HM use does not provide the squeeze-release action and requires an erection.

*NIPPLE MASSAGER: (NM) Used to stimulate the nipples or breast with a squeeze-release action. May be purchased individually or as a pair. If you purchase a pair, we include a "Y" connector and two 12 inch lengths of large hose. This attachment can also be configured to create a suction action similar to the Pump. If you wish to try this, assembly instructions are included.

* All HM/NM Attachments Ship with an End Cap. They are the same item.

When you use it as a HM you remove the End Cap. When you use it as a NM, you leave the End Cap on .

Note: By placing a "Y" connection in the large hose, certain attachments may be used at the same time.

Housings for Attachments are Available in Three Diameters and Several Lengths:

Housings are made from a clear plastic acrylic and are available in a 2", 2.5" or 3" inside diameter. All Housings have an air port on the side to connect the hose to the V2000. The Head Massager / Nipple Massager are 3" in length. The Receiver and Pump are stocked in 6", 7", 8" and 9" lengths. We can make any length by custom order. 80% of men fit into the 2" housing. The 6" is the most common length. Receivers are sized so the Housing is at least 1/2" longer than your erect penis and the Pump is sized to be at least 1" longer.

Liner Material is Available in a Variety of Sizes: 

Liner material provides the seal (constriction) necessary to prevent air from entering the Housing between the Liner and the penis. Additionally, Liner material is used in a Receiver to hug and massage the full length of the penis shaft during each stroke. Liner material is measured by laying it flat and measuring across. Liner material is stocked in, 1.62", 1.75", 1.88", 2.00", 2.12", 2.25", 2.50" and 3.00" widths. Liner material is sold in 30" lengths so you may cut the length needed for your attachment configuration . Most users can install it without difficulty. Complete assembly instructions are provided.

We Have End Caps to Fit All Three Housings and in Three Forms:

End caps are used on all attachments except the Head Massager. The End-Cap is removable so you can run water through the attachment to clean it. End Caps are available with "no valve", "one valve", or "two valves". One-way valves allow air, that may have infiltrated past the constriction, to be expelled. If you have a very good fit and no leakage, you may get better action with a "no valve" End Cap. All attachments are shipped with a "one valve" End Cap. If you have considerable leakage and are not able to control it, you may need a "two valve" End Cap. A valve must be present for pumping.