Simple Receiver Rebuild Initial Steps

The required  parts collected. The cleaned housing with ends well sanded and polished, a well cleaned cap, a cut length for the liner itself, a shorter length for the constrictor, and a pair of 1-inch widths for the outer bands. This is a 2-inch receiver housing and 200 liner material. Note that while the liner material looks quite wide here flattened out, it will be a considerably smaller size when made round during mounting. Also note the length of the cut liner relative to the rigid tubular housing. This is just about right. It could be a bit shorter, but this length makes for easy handling.

08/04

Hours: 8:30 am-4:30 pm Monday thru Friday Central Time Zone (Illinois time). Not open on six major holidays.